Know Where Your Build Stands.
Stage inspections at slab, frame, lock-up and pre-handover, with clear written reports.
Enquire About An InspectionWhat We Check
Slab
Before and around the concrete pour — set-out, slab preparation, visible reinforcement and plumbing penetrations, site drainage and general workmanship.
Frame
Once the frame is up — wall and roof framing, tie-downs and bracing as visible, set-out against plans, and items to raise before linings cover them.
Lock-up
When external walls, roof, windows and doors are in — weatherproofing details, external finishes, flashings as visible and overall progress.
Pre-handover
Before you take the keys — finishes, fixtures, fittings, paint, tiling, doors and windows, with a defects list to work through before handover.
Clear, Written Reports
- A written report for each stage inspected
- Clear photos of items noted on site
- Plain-English descriptions of anything to follow up
- A list you can take to your builder or certifier
Inspections report on what is visible at the time of the visit. They are not engineering advice or a certificate of compliance.
Your Inspection Prep Checklist
Describe your property and stage, and we'll create a tailored list of things to prepare before your inspection.
General preparation guidance only — not a compliance assessment or a substitute for a professional inspection. Your inspector and builder confirm what applies to your build.
The References Behind A Good Inspection
These are the published standards and resources that residential building work in Queensland is commonly assessed against. They're free to read and worth a look before your inspection.
Queensland Building and Construction Commission
QBCC Standards and Tolerances Guide
The Queensland guide used to assess whether building work is defective — covering tolerances for slabs, frames, masonry, waterproofing, finishes and more. It's the reference most stage inspections are measured against.
Visit resource →Australian Building Codes Board
National Construction Code (NCC)
Australia's national technical requirements for building design and construction, including the Building Code of Australia. Free to read online after registering with the ABCB.
Visit resource →CSIRO Building Technology Resources
Foundation Maintenance and Footing Performance
CSIRO's homeowner's guide to soil-related building movement — how reactive clay, erosion and saturation affect slabs and footings, and the maintenance steps that help prevent cracking.
Visit resource →These links are provided for general information. Interpreting how a standard applies to your build is part of what your inspection report covers — and engineering matters should always be confirmed with a qualified engineer.
Building Inspections Questions
When should I book each inspection?+
Book the slab inspection before the concrete is poured or as soon as the slab stage is reached, the frame inspection once framing is complete but before linings go on, lock-up once the home is enclosed, and pre-handover a few days before your scheduled handover. Ask your builder for stage dates early so visits can be lined up.
What do the written reports include?+
Each report records the stage inspected, the date, the items observed with photos, and plain-English notes on anything you may want to raise. Reports are a record of what was visible on the day — they are not a certificate of compliance.
How do I arrange a visit?+
Send us an enquiry with your address, construction stage and preferred dates. We'll confirm availability and what access is needed. Your builder's permission to attend site is usually required, so let them know in advance.
Can I book just one stage?+
Yes. You can book a single inspection, such as pre-handover, or a series across the build.
Do I need to be there?+
It's not required, but you're welcome to attend if site access allows. We'll walk you through the report either way.